FPV

Ovonic 1550mAh 4S 14.8V 100C LiPo Battery XT60 Plug for FPV

This article mainly introduces Ovonic 1550mAh 4S 14.8V 100C LiPo Battery XT60 Plug for FPV, and it'd be better to know what the FPV is before the introduction to this FPV battery. First-person view(FPV), also named remote-person view(RPV), is to remotely control a device by radio signal from the view point of aircraft. FPV is a kind of radio controlled flying vehicle that has gained its popularity in recent years.

FPV can be mainly divided into FPV freestyle, FPV racing, and aerial photography. FPV freestyle is to freely fly without limitation and you can perform your great tricks, While FPV racing is to race with a group of pilots and for victory based on the rapid speed. Besides, the purpose of aerial photography is to take photos and videos, which requires high clear sooth footage and is widely used in the journal, emergency rescue and disaster relief, and commercial performance, etc.Power is the main and essential part of radio controlled vehicle. Different types of remote-person view drone demand different kinds of batteries. Therefore, it's necessary to choose suitable batteries according to your drone.

Ovonic is an emerging and credible battery brand that has been widely accepted by RC hobbyists and popular currently. To suit the various needs of radio control, Ovonic has committed to design and produce different kinds of lipo batteries, such as RC car batteries, RC plane batteries, and FPV lipo batteries. As its name implies, FPV battery is specially designed for unmanned aerial vehicles with cameras. Ovonic 1550mAh 4S 14.8V 100C LiPo Battery XT60 Plug for FPV is perfectly fit for FPV freestyle.

What's Ovonic 1550mAh 4S 14.8V 100C LiPo Battery XT60 Plug for FPV?

1550mAh 4S features and specs:

  • Chemistry: Li-polymer
  • Cell Number: 4S 
  • Voltage(V): 14.8V 
  • Capacity(mAh): 1550mAh 
  • Discharge Rate: 100C 
  • Charge Plug: JST-XH 
  • Discharge Plug: XT60 Connector
  • Net Weight(dev.20g): 192g 
  • Battery Dimension: 69mm x 32mm x 36mm
     
    1550mah 4s 100c

     For an FPV battery, it's not easy to afford the great consumption of an unmanned aerial vehicle. An FPV battery requires a large variety of energy and stable performance. This product is available in 1550mAh that perfectly meet the requirement of high power and high energy density. That is great for daily training and freestyle and enough power to get your FPV fly from your home to mountain.

    In addition, there are many different voltages for batteries that show in the S-rating, including 2S, 3S, 4S, 5S, and 6S, etc. For min first-person view drone, the 4S is the standard and commonly used battery. 4S features higher power and gives the great punch for your quads to complete the amazing flip and awesome maneuver. Some novices may gonna buy 3S batteries at the beginning since they'd think this kind of battery owns less power than 4S and it would be easier to learn to operate the quadcopter. As far as I'm concerned, it's not necessary to do so because you'll understand and grasp the skills of flying your drone quickly. You just need to practice more rather than select 3S batteries. Ovonic 1550mAh 4S 14.8V 100C LiPo Battery XT60 Plug for FPV can deliver this suited power with guaranteed safety in the process.  

                                   

    Besides, this product owns the XT60 discharge plug.  In general, XT60 connector features high Amp connection and the super solid connection. It's made of nylon that can prevent from melting and pin loosening. So this is a safe and superior connector.  

    Last but not least, someone may wanna know what kinds of first-person view drone Ovonic 1550mAh 4S 14.8V 100C LiPo Battery XT6 can apply to? Hahh, Good question! This product can be applied to Nemesis 240 Mini, Tweaker 180 Micro Quad, LRC Freestyle V1(270-296), MXP180 FPV Quadcopter, Danaus, Vortex, FLIP FPV 250S MINI, FLIP FPV 260H MINI), drone and FPV.

    Previous article Flex Innovations RV-8 NIGHT SUPER PNP Review

    Leave a comment

    Comments must be approved before appearing

    * Required fields